CPU frequency | L3 Cache | QPI |
|---|
E5-2660v3 | 10 | 105 W | 2133 | 2.3 GHz | 25MB | 9.6 GT/s | E5-2650Lv3 | 12 | 65 W | 2133 | 2.6 GHz | 20MB | 8.0 GT/s | E5-2630v3 | 8 | 85 W | 1866 | 1.8 GHz | 20MB | 8.0 GT/s | E5-2609v3 | 6 | 85 W | 1600 | 2.4 GHz | 15MB | 8.0 GT/s | E5-2603v3 | 6 | 85 W | 1600 | 2.0 GHz | 35MB | 9.6 GT/s | E5-2650v4 | 12 | 105 W | 2400 | 1.7 GHz | 35MB | 9.6 GT/s | E5-2640v4 | 10 | 90 W | 2133 | 2.2 GHz | 25MB | 8.0 GT/s | E5-2630Lv4 | 10 | 55 W | 2133 | 2.1 GHz | 20MB | 8.0 GT/s | E5-2609v4 | 8 | 85 W | 1866 | 1.7 GHz | 15MB | 6.4 GT/s | E5-2695v4 | 18 | 120 W | 2400 | 2.1 GHz | 40MB | 9.6 GT/s | E5-2680v4 | 14 | 120 W | 2400 |
|
15MB (1 x 15MB) level 3 cache (For six-core processors) 20MB (1 x 20MB) level 3 cache (For eight-core processors) 30MB (1 x 30MB) level 3 cache (For twelve-core processors) 25MB (1 x 25MB) level 3 cache (For ten-core processors) 35MB (1 x 35MB) level 3 cache (For fourteen-core processors)
|
|
HPE iLO (Firmware HPE iLO4 2.0) 2GB NAND |
| 16 | 512GB (16 x 32GB LRDIMM @2400 MHz) | 512GB (16 x 32GB RDIMM @2400 MHz) | NOTE: This server does not support mixing LRDIMMs or RDIMMs. Attempting to mix any combinationof these DIMMs can cause the server to halt during BIOS installation |
|
Online spare |
|---|
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip | Memory online spare mode detects a rank that is degrading and switches operation to the spare rank |
|
Broadcom 5717 Dual-port 1Gb |
Technology | Connector Width | Form Factor |
|---|
7 | x1 | - | - | PCIe 3.0 | x8 | Full length/full height | 5 | x16 | - | For processor 1 | PCIe 3.0 | x8 | Half length/full height | 3 | x16 | - | For processor 2 | PCIe 3.0 | x8 | Half length/full height | 1 | x8 | - | For processor 2 |
|
HPE Dynamic Smart Array B140i Controller | HPE Dynamic Smart Array B140i Controller | HPE H240 FIO Smart Host Bus Adapter | NOTE: B140i can't mix with any standup internal controller |
|
Optional SATA 9.5 mm DVD-ROM optical drive | | None ship standard | NOTE:Mixing drive cage types is not allowed All Pre-configured Models come populated with hard drive blanksinstalled. The 4LFF configurations includes 2 blanks and 8SFF includes 6blanks NHPE SATA is limited to B140i controller
| Up to 10 Non-hot plug SATA 3.5 in drives | (4) Hot plug LFF SAS/SATA HDD bays; upgradable to (8) | (8) Hot plug SFF SAS/SATA HDD bays; upgradable to (16) | NOTE:NHPE SATA is limited to B140i controller NHPE SATA is limited to B140i controller H240 8LFF/8SFF require 2 cable kit P/N: 784606-B21 H240 8LFF/8SFF require 2 cable kit P/N: 784606-B21
|
|
Capacity |
|---|
Hot Plug LFF SAS | 8 x 10TB | 80TB | Hot Plug SFF SAS | 16 x 2TB | 32TB | Non-Hot Plug LFF SATA | 10 x 4TB | 12.8TB | Hot Plug LFF SATA SSD | 8 x 3.84TB | 30.72TB | Hot Plug SFF SATA SSD | 16 x 3.84TB |
|
NOTE:Each redundant power supply backplane can support up to two (2) power input modules.Non-redundant configurations with a single power input module installed can provide up to 900 W (200 – 240 V ac) and up to 550 W (100 – 127 V ac) of power Redundant configurations with twopower input modules installed can provide up to 800 W (200 – 240 V ac) and up to 550 W (100 –127 V ac) of power
|
HPE T/R conv tray universal kit |
Non-redundant |
|---|
1 P model | NA | NOTE: Two (2) Non-hot plug, non-redundant fans ship as standard | 3 fans | NOTE: Third fan is shipped with 2nd CPU kit. Third fan is only required in 2P configurations |
|
1 (Rear) | 2 | 2Gb dedicated | Micro SD Slot | NOTE: The Micro-SD slot is not a hot-pluggable device. Users should not attempt to plug aMicro-SD card into the Micro-SD slot while the server is powered | 5 (2 rear, 1 internal, 2 front) | 3 (2 rear, 1 internal) |
|
Upgradeable to 2 processors (36 cores) Up to 16 SFF hard drive bays; Or 10 LFF hard drive bays Up to 16 DIMM slots Redundant power supply Tower to rack conversion Optional optical drive (Up to 1)
NOTE: When populate 10 LFF, not able to install optical drive. Possible configurations: 1) 8LFF+1 ODD + 1 tape drive (Full/half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1 tape drive (Full/half) |
Integrated Matrox G200 video standard 1280 x 1024 (32 b/p) 1920 x 1200 (16 b/p)
|
Tower or rack (5U) |
ACPI 2.0b Compliant PCIe 3.0 Compliant PXE support WOL support Novell certified IPMI 2.0, SMASH CLP, DCMI 1.0 compliant Microsoft Logo certifications USB 3.0 support SMBIOS 2.7.1 ASHRAE A3
|
Power-on password Setup password Serial interface control Power switch security Administrator's password TPM 1.2 UEFI
|
Insightcontrol HPE Insight Control, lets user deploy, migrate, monitor, remote control, andoptimize users IT infrastructure through a single, simple management console. Formore information |
UEFI/Legacy ROM | Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageabilityand more secured configuration than the legacy ROM while interacting with users server at boot time UEFI enables numerous new capabilities specific to HPE ProLiant servers such as Secure boot Operating system specific functionality Support for > 2.2 TB (Using GPT) boot drives USB 3.0 stack Embedded UEFI shell Mass configuration deployment tool using RESTful API for iLO 4 PXE boot support for IPv6 networks Boot support for option cards that only support a UEFI option ROM Network Stack configurations
NOTE:For UEFI boot mode, boot environment and OS image installations should be configuredproperly to support UEFI UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode inthe factory for users HPE ProLiant Gen9 Server
|
Whether user need to solve a specific data protection, archiving, or storage command and controlchallenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no furtherthan HPE storage software Data protection and recovery software Data archive and migration software Storage Resource Management software (SRM) Data replication software Storage device management software HPE StoreVirtual VSA
|
Smart Update HPE SystemsInsight Manager(HPE SIM) Scripting ToolKit andWindowsPowerShell RESTfulInterface Tool HPE iLO MobileApplication HPE InsightOnline
|
iLO Essentials | iLO Advanced |
HPE iLO Essentials is the preferred license for small and medium business thatoffers full remote server management capabilities for small and medium business VIA the Integrated Remote Console (IRC), virtual media, and e-mail based alerts Wrote:Google play apps do not update often times, often getting stuck after being fully downloaded and will not install until either google play is killed and re-opened, or the phone is rebooted. This seems to happen most often with Google Play and Twitter.Upon rebooting the phone, if I was not using the stock launcher, I will be asked which launcher to use, even if I choose to Always use it, next reboot I will be asked again.Push notifications seem to work sometimes, then other times not at all. I'll miss emails, hangouts, and more.Overall not very satisfied with this new phone so far. Reopening google play will install one app, rebooting the phone will install a few.Tapping on a notification will sometimes be entirely ignored. User manual for iphone. Reopening google play will install one app, rebooting the phone will install a few.Tapping on a notification will sometimes be entirely ignored.
| HPE iLO Scale-Out is the preferred license built for web hosting, cloud serviceproviders, and high performance computing data centers, managing massive scaleout environments for the DL 100 and 10 series servers, not available for MLservers This license offers sophisticated scripting tools that provides remoteaccess through Text Console via SSH, Dynamic power capping, Email-basedAlerting and proactive notifications. For more information Click here to access the 'HPE iLO Scale-OutFind a partner '.
| HPE iLO advanced licenses offer smart remote functionality without compromise,for all HPE ProLiant servers The license includes the full integrated remoteconsole, virtual Keyboard, Video, and Mouse (KVM), multi-user collaboration,console record and replay, and GUI-based and scripted virtual media and virtualfolders User can also activate the enhanced security and power managementfunctionality. To learn more Click here to access the 'HPE iLO Advanced'.
|
